Uncategorized

The advantage of Perma-Cal Direct Drive pressure gauges over conventional C-tube gauges is simple; only one moving part.  Perma-Cal gauges have a unique helical-wound element that is attached directly to the pointer shaft.  This eliminates the need for any movement-amplifying gears or linkages – the parts of a C tube gauge that fail most frequently.  Perma-Cal gauges maintain their structural integrity and accurate calibration in the most demanding environments, even during prolonged and rugged use. Specifications:

Ordering Information: Seal Material:  Replace ∆ with desired code  –  Blank = Nitrile (Buna)      S = Low Temp Buna.      N = FKM*      E = Neoprene    A = EPDM When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (EH22J7DCCM 120/60) repair pack (2KEH22J AC) When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OEH22JDDCCM 120/60) Operating Conditions:  Media:  Air and other non-corrosive gasses, water and oil. Filtration:  Down to 60 microns or less is recommended. Valve Temperature Range:  Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.* Maximum Operating Pressure Differentials:  See table above. Burst Pressure:  10,000 PSI Leakage:  Bubbletight (with polymer sealing pins) Electrical Characteristics:  Coil Voltage:  12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60. Nominal Power:  AC — 7.3 Watts DC — 9.5 Watts Coil Construction:  Molded Class F with third wire ground (Std.), Class H or Potted (Opt.) Typical Response Time on Air:  4 – 16 Milliseconds Operating Speed:  Up to 600 CPM with gas media Duty Cycle:  Continuous Mechanical Characteristics :  Body:  Stainless Steel Internal Components:  Stainless Steel. Copper – AC Only. Elastomers:  Nitrile (Buna) (Std.). Many other elastomers available.* Sealing Pin:  Kel-F (Std.), Delrin®, Teflon®, Nylon, PEEK, Radel®, Ultem®, 303 Stainless Steel (Opt.) Orifice Diameter:  See table above. Porting:  1/8″ and 1/4″ NPT (other ports available). Housing:  Flame-Proof Construction with 1/2″ NPT conduit Mounting:  Must be mounted within 30° of vertical. Listings:  Valves are UL listed for use in the United States and Canada for Hazardous Locations — Class I, Div 1, Group C and D – Class II, Div 1, Group E, F, and G; Div 2, Groups A, B, C, D, E, F, and G. Life Expectancy:  Millions of cycles, depending on application, lubrication, etc. Valve Weight:  1.50 lbs Repair Packs:  See table above. Options:  Alternate Sealing Pin Materials and Alternate Elastomers*

Dragon Valves Inc., founded in 1945, manufactures instrumentation, manifold and specialty valves. Dragon manufactures power valves in accordance with ASME Section III Class 1, 2 and 3 under its “N” stamp quality program. All valves are designed, machined, assembled, and tested in Norwalk, California. Dragon valves are widely used in for example in aerospace, chemical industry, power generation, commercial diving, ship building, as well as process and petrochemical industries. E.M. LEINO OY is a long time partner, dealer and stockist for Dragon Valves Inc. for the EMEA reagion. Valve styles include forged and barstock valves in Carbon, 316 Stainless Steel and other alloys. Sizes range from 1/8″ through 2″ in all end connection types.  Valve Types – Air Operated– Bar Stock– Block & Bleed– Cartridge– Check– Compact– Cryogenic down to -223 °C– Diaphragm– Forged Body– Gage– Gage w/ Stem Test Connection – Gage with Integral Bleed– High Pressure– High Temperature up to +607°C– High Flow– Instrumentation– Integral Bonnet– Manifold – 1 Valve– Manifold – 2 Valve– Manifold – 3 Valve– Manifold – 5 Valve– Miniature – MIL-V-24578, 24586– Needle– Nuclear “N” Stamped– O.S.&Y– Orifice Gage– Plug– Remote Controlled– Severe Service– Soft Seat– Steam– Union Bonnet Please send us an enquiry or call us for product specifications, price, availability and application assistance. We’re happy to help!

Accuracy Dependent upon pilot Max Inlet Pressure 3000 PSIG @100F (material specific) Max Outlet Pressure 1000 PSIG @ 100F (material specific) CV Rating Controllable range 4 to 220 Turn-Down Ratio 1000:1 Shutoff ANSI/FCI 70-3 Class VI Operating Temperature -425 to 450 F Set Points To Inches of Water Column

Pressure Rating Maximum Inlet Pressure: 1000 or 3480 psig / 69.0 or 240 barOutlet Pressure Ranges: 145, 247 psig / 10.0, 17.0 bar Materials Body: Stainless Steel 1.4404Regualtor Seat: PCTFEValve Seat: Ceramic on Stainless SteelRemaining Parts: 316 Stainless Steel Operating Temperature -40°F to 140°F / -40°C to 60°C Flow Capacity < 9 Nm3/h at Cv = 0.06 trim Leak Rate 1 x 10-8 mbar l/s He Additional Information For custom modifications or a complete system solution, please contact your local sales office.

Proportion-Air’s electronic pressure regulators provide precise, repeatable control across a wide range of pressures and flows. These regulators are ideal for applications requiring high accuracy and integration with automation systems. Key Models: Model Pressure Range Accuracy Max Flow Features QB1S/QB2S Vacuum to 500 psig ±0.25% F.S. 1.2 SCFM Compact IP65 housing, analog monitor output, dual-loop control, unaffected by vibration QB1X/QB2X Vacuum to 175 psig ±0.2% F.S. 1.2 SCFM Similar to QB1S/QB2S with aluminum or stainless steel manifold options QB3 Vacuum to 150 psig ±0.25% F.S. 30 SCFM Integrated volume booster, digital display option, ¼” NPT ports QB3H Vacuum to 500 psig ±0.5% F.S. 50 SCFM High-pressure version of QB3, available in aluminum, stainless steel, or brass bodies GP Series Vacuum to 1000 psig ±0.45% F.S. 10 SCFM Compact design, immune to shock and vibration, internal/external sense options