Ordering Information:
Seal Material: Replace ∆ with desired code – Blank = Nitrile (Buna) S = Low Temp Buna. N = FKM* E = Neoprene A = EPDM
When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (EH22J7DCCM 120/60) repair pack (2KEH22J AC)
When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OEH22JDDCCM 120/60)
Operating Conditions:
Media:
Air and other non-corrosive gasses, water and oil.
Filtration:
Down to 60 microns or less is recommended.
Valve Temperature Range:
Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
Maximum Operating Pressure Differentials:
See table above.
Burst Pressure:
10,000 PSI
Leakage:
Bubbletight (with polymer sealing pins)
Electrical Characteristics:
Coil Voltage:
12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.
Nominal Power:
AC — 7.3 Watts DC — 9.5 Watts
Coil Construction:
Molded Class F with third wire ground (Std.), Class H or Potted (Opt.)
Typical Response Time on Air:
4 – 16 Milliseconds
Operating Speed:
Up to 600 CPM with gas media
Duty Cycle:
Continuous
Mechanical Characteristics :
Body:
Stainless Steel
Internal Components:
Stainless Steel. Copper – AC Only.
Elastomers:
Nitrile (Buna) (Std.). Many other elastomers available.*
Sealing Pin:
Kel-F (Std.), Delrin®, Teflon®, Nylon, PEEK, Radel®, Ultem®, 303 Stainless Steel (Opt.)
Orifice Diameter:
See table above.
Porting:
1/8″ and 1/4″ NPT (other ports available).
Housing:
Flame-Proof Construction with 1/2″ NPT conduit
Mounting:
Must be mounted within 30° of vertical.
Listings:
Valves are UL listed for use in the United States and Canada for Hazardous Locations — Class I, Div 1, Group C and D – Class II, Div 1, Group E, F, and G; Div 2, Groups A, B, C, D, E, F, and G.
Life Expectancy:
Millions of cycles, depending on application, lubrication, etc.
Valve Weight:
1.50 lbs
Repair Packs:
See table above.
Options:
Alternate Sealing Pin Materials and Alternate Elastomers*